Sachtler CamCrane EFP, Руководство пользователя

Страница: 42 / 57

CamCrane EFP Manual
- 36 -
Please refer to the table below to see which pipes need to be used for the desired
crane arm length.
You can assemble the following telescopic lengths:
Type of pipe for telescopic length
1.7 m /
5’7"
“Super-
short“
2.9 m /
9’6"
“Short“
4.1 m /
13'5“
“M
edium
“
5.3 m /
17'5”
“Long“
Option
6.5 m /
21'4”
“Extra-
long“
1 Weight pipe X X X X X
2
Main pipe
with towers and
outriggers
X X X X X
3
Extension pipe 1
X X X X
4
Support pipe
with small towers and
outriggers
X X
5 Extension pipe 2 X X X
6 Pipe with camera plate X X X X X
7
Option “extra-long“
additional pipe
1,2 m / 1.3 yd
(not shown)
X
Õ
Begin the pipe assembly by inserting the weight pipe into the tripod head.
Insert it into the side where the bubble level is located.
Õ
Push the pipes into each other.
Õ
Press and hold down the press-buttons on one
pipe and let them snap into the perforations of
the other pipe.
á
The connection is complete, when red press-
buttons project fully through the outer pipe on
both sides.
Õ
Proceed in the same way with the other selected pipes, until you have achieved the
desired crane arm length.