WP-560
16
3.
Using concrete pegs mount the lift on the sealing. The lowered section of your lift should be
placed centric in regards to the opening. If your ceiling is not perfectly flat, use additional
holes (fig. 5).
4.
Mount the cable brackets
(fig. 6):
Step 1: plug bracket into square hole
Step 2: push the plug into the opening
Step 3: Draw the cables
fig
. 6a
fig. 5
Adjust the brackets by loosening and
tightening
t
he screws. Use the spirit level,
as the lift should operate in proper levelled
.
conditions
fig
. 6b
