Sabaj WP-560, Сборка и руководство по эксплуатации

Страница: 18 / 22

WP-560
helpdesk@sabaj.pl
18
6. Use the UP and DOWN buttons to adjust the height of the bottom of the PROJECTOR
LIFT so that the mounted projector is raised by 3 cm. above the upper edge of the
suspended ceiling (fig. 8a). With threaded pins set cover frame, to a desired height. It
should touch the ceiling delicately after lift achieves the TOP position (fig . 8b ).
7. After setting the cover, turn the nuts to lock the pin (fig. 9). Cover should be adjusted , so it
adheres to the ceiling .
If the pin is too long,
cut it with a hacksaw
fig . 9
fig . 8b
fig . 8a