Assembly and operating manual
rtv.sabaj.pl/en/home/
5.
Connect lift to the control box (fig. 7a i 7b). Control box can be mounted on the ceiling,
suspended ceiling, or just lay it on the side. It is imp
ortant
, that both cables and the control
box are not in the way of the lift
.
a)
Prepare the cable harness and connect it as you see on the pictures. Do not put too
much pressure to connect the harness, as it is designed to be plugged correctly without
too much force
b) Plug the control box harness as marked on picture below (fig. 7c)
.
Put the electrical plug
to the electrical network
.
CAUTION:
if the control box display show any number or symbol
-
check the control box manu
al
on page 21, before going to further steps
.
fig
. 7a
fig
. 7b
rys.
7c
