11
12
GB
GB
Instructions for child lock lever
Installation
Press the child's lock lever with your thumb as the direction as below
①
and the water lever
②
will be locked and effectively reduced the
water took by children.
Press in the opposite direction to unlock and take water
Open the inlet cover of water tank
①
. Slowly fill the tank with pure
drinking water up to the maximum fill line marked with “2L”. Then
close the inlet cover
①
.
To prevent any spills, please use a narrow-bore container to charge water.
*
Only direct drinking water or mineral water can be stored in the
water tank.
1.Hold both sides of the tank with hands and pull the tank assembly off
the door slightly in the direction indicated as below.
Notes:The transparent silicone parts of the sealed water valve could
be brought out meantime when removing the water tank. lf so, remove
them,and re-install them according to the following steps.
1-1.Align the sealed part with the hole in the door and place it in it.
1-2.It will be completed when the step of sealed part can be fitted to
the step in the hole.2.Rotate counterclockwise to remove the water
valve assembly from the water tank for cleaning.
2.Rotate counterclockwise to remove the water valve assembly from
the water tank for cleaning.
3.Pinch the flange of the water tank cover slightly upwards,and the
water tank cover can be separated from the water tank.Remove the
other side with the same method .
The tank and its cover can be cleaned after disassembly.
4.Install the water valve by rotating it clockwise after cleaning.When
installing the tank cover, install the one side at first (do not press it all
the way), then install the other side. Press firmly on edges of the tank
cover to fit the tank.Re-install the entire water tank assembly at 45 to
the door.Press the outer edge of the water tank slightly downwards to
make it fit into the door.
Instructions for water tank assembly
Fill the tank with pure drink water
①
②
MAX
2L
1
MAX
2L
Before Using
Starting and function setting
Operation
Remove all packages, including the foam backing at the bottom of refrigerator
and the tapes fixing accessories in the box.
Place the refrigerator to a proper position, and adjust the feet to level.
It is better to clean the refrigerator before use.
Place the refrigerator and adjust to level, clean it, let the refrigerator stand for
above 2 ~ 6 hours, and then power on to ensure that the refrigerator can
operate normally.
Connect the power cord, and turn on the power switch.
Upon startup for the first time, the screen will display respective set temperature
values (the temperature of the fridge section is set to 5°C, the temperature of the
freezer is set to-18°C).
Function setting of LED display
The default mode is energy saving upon startup: The screen displays for 20s and
then goes off. This mode to save energy and prolong the service life of LED lights.
Control panel
Holiday mode icon
Display lock icon
Mechanical lock
Refrigerator
temperature control
Feature button
Super freezer icon
Fonction
Congélateur
Réfrigérateur
Verrouillage
Super fridge icon
Freezer
temperature control
Refrigerator
temperature display
Freezer
temperature display
lock/unlock button
