9
1
0
GB
GB
Select a good location to place your appliance where it is flat and easy to
use.Avoid placing the unit near heat sources,direct sunlight or moisture.
The figure above is schematic for installation only, not
representing the actual product. The specific dimension shall be
subject to the product that you have bought.
To ensure proper air circulation around the fridge,please
maintain sufficient space.If install the top panel or closet,please
maintain sufficient space to move when necessary.
Installation dimension
Transport
Place environment
Installation
Do not carry the refrigerator horizontally or reversely.
Do not carry the refrigerator by holding the door or
handle; the refrigerator shall be carried by lifting the bottom.
The refrigerator must be placed on a hard, flat ground;
if cushioning is needed, stable, hard, nonflammable
cushion blocks shall be used, rather than the foam
backing of refrigerator.
The refrigerator shall be kept away from damp locations
where water is easy to splash; water or dirt shall be removed
with soft cloth timely to prevent rusting which may have
an effect on the electrical characteristics.
Place the refrigerator in a well-ventilated place, reserve a
certain space around and behind the refrigerator, and do
not cover or block the air grille on the rear cover plate of
compressor at the back of refrigerator; Keep the refrigerator
away from heat source or direct sunlight.
When the refrigerator stays in the packing box, plastic
feet are in tightened state. After carrying it out from the
packing box for placement, please make sure to adjust
two front plastic feet until the height is suitable; just adjust
two plastic feet with a wrench or directly by hand.
Plastic feet and rear rollers must touch the ground to
prevent the refrigerator from movement, vibration or
noise.
When moving the refrigerator, adjust plastic feet
counterclockwise to keep them off the ground, and
then push the refrigerator gently to move it.
Adjust plastic feet
339
382
1521
1076
1026
1830
1830
836
706
