Saab R5 SUPREME MkII, Руководство по эксплуатации и установке

Страница: 93 / 173

R5
SUPREME - Navigation System
CONFIGURATION
7000 118-383, P11A1 Page 93
RTE/Rnn WP Limit Determines the maximum number of remaining
waypoints in the active route that shall be transmitted
in RTE and Rnn messages.
Status Information The Status Information parameter defines whether
current position (when available) from a navigation
sensor or the name of the next waypoint is to be
displayed in the status bar at the upper left corner of
the R5 SUPREME CDU.
Track Log Interval This interval parameter defines how often a track
sample will be taken during track log operation.
See 8.3.9 and 8.3.10 for more information about
“Track Log”.
Automatically Selection
Closest Tide Port
Enables the system to automatically choose the
nearest inputted port for calculation and reporting of
tides.
See 8.2.3
for more information about “Tide” .
GNSS/DGNSS
This view is accessed by pressing Main Menu

Configuration

GNSS / DGNSS

GNSS
Parameter Name Description
Elevation Mask This parameter sets the elevation cut-off mask angle,
in degrees, for satellites. Any satellites below this mask
angle will be ignored, even if available. The value
should be between 0° and 60°, and the default value is
5°.
Correction Age This parameter sets the maximum allowed age (in
seconds) for correction data. The R5 Navigation
Sensor is able to use old correction data for extended
periods of time. The default setting is 120 seconds.
The lowest allowed value is 10 seconds and the
highest 900 seconds. When increasing the allowed
correction age, ensure that the new setting meets your
requirements as accuracy will degrade with increasing
correction age.
Correction Source This parameter sets the source for differential
corrections. Valid settings are:
Beacon. In this setting the system will use signals from
IALA radio beacon stations as source for differential
corrections. This setting is only available when using
an R5 DGNSS Navigation Sensor.