Saab R5 SUPREME MkII, Руководство по эксплуатации и установке

Страница: 42 / 173

R5
SUPREME - Navigation System MkII
OPERATION FUNCTIONALLITIES
7000 118-383, B1 Page 42
Anchor Watch
The Anchor Watch view provides functionality for activation of an alarm when the dis-
placement from a reference position exceeds a certain limit. The view is accessed from Main
Menu

Navigate

Anchor Watch . In order for an external or audible anchor watch alarm
to be generated, the anchor watch alarm must be enabled in the Alarm Config view accessed
from Main Menu

Maintenance

Configuration

Alarm .
When entering the Anchor Watch view, the following will be displayed:
Figure 23
– Anchor Watch
8.1.2.1 Set Anchor Watch Alarm Distance
To set the alarm distance, click on the alarm distance edit field (marked with an orange square
in the picture above). A virtual numpad will appear where it is possible to set the new value
for the anchor alarm distance. Press on the enter button of the virtual numpad when done.
The alarm distance must be within 1 to 1500 meters. The unit used for definition of the anchor
watch alarm limit as well as for display of the current range to the reference position is
configurable, as described in section 10.1.12
“Units”.
Figure 24
– Input of Anchor Watch Alarm Distance
8.1.2.2 Activate Anchor Watch
Press the ”Begin Watch” button to activate the anchor watch function. The current position
will be captured as the reference position. The distance to the reference position will be