Saab R5 SUPREME MkII Скачать руководство пользователя страница 128

Страница: 128 / 173

SUPREME - Navigation System

TROUBLESHOOTING

7000 118-383, P11A1

Page 128

Lost Connection to Display (ID 060)

This alarm is active when connection is lost between R5 Navigation Sensor and CDU.

NAV: HDOP Limit Exceeded (ID 151)

This alarm is active when the HDOP (horizontal dilution of precision) exceeds 4.0.

NAV: Position Data Lost (ID 152)

This alarm is active when no valid position information is available from the R5 Navigation
Sensor.

NAV: DGNSS Position Data Lost (ID 153)

This alarm is active when a differentially corrected position is not available.

NAV: GNSS Not Initialized (ID 154)

The alarm is active when the display is not able to configure or receive the current
configuration from the R4 Navigation Sensor.

NAV: GNSS Connection Lost (ID 155)

This alarm is active if the communication between the GNSS and the R5 SUPREME CDU
does not work.

NAV: XTE Limit Exceeded (ID 156)

This alarm is active if the current cross-track error is greater than the configured cross-track
error limit.

NAV: Approaching Waypoint (Distance) (ID 157)

This alarm is active when the distance to next waypoint is shorter than the approach distance
configured in the

Navigation Configuration

view, described in section 10.1.1.

NAV: Approaching Waypoint (Time) (ID 170)

This alarm is active when the estimated time to go to next waypoint is shorter than the
waypoint approach time configured in the

Navigation Configuration

view, described in section

10.1.1.

NAV: Heading Data Lost (ID 161)

This alarm is active when no valid heading data is received.

NAV: Depth Data Lost (ID 162)

This alarm is active when no valid depth data is received.

NAV: RAIM Status - Caution (ID 163)

This alarm is active when the RAIM status is caution.

Содержание R5 SUPREME MkII














































































































































































Результаты поиска

Содержание R5 SUPREME MkII

Отзывы:

Бренды по названию

Популярные бренды

Saab R5 SUPREME MkII, Руководство по эксплуатации и установке

Результаты поиска

Содержание R5 SUPREME MkII

Отзывы:

Бренды по названию

Популярные бренды