Saab R5 SUPREME MkII, Руководство по эксплуатации и установке

Страница: 67 / 173

R5
SUPREME - Navigation System
OPERATION FUNCTIONALLITIES
7000 118-383, P11A1 Page 67
The following data can be input for each port:
ID Port No. from ATT part III.
Name Place name from ATT part III.
Zone UTC offset time zone (UTC time
– Local Time) in hours and
minutes from ATT part III. This information is important since
ATT data is referenced to a local time in port with this offset
from UTC. Enter this data as defined in ATT regardless of
adjustments for other local time offsets (e.g daylight savings
time). See further notes on treatment of time offset in sections
below.
Position Latitude and longitude of port. This is optional information that
is not required for calculation of tides. If entered, the current
distance to the actual port will be shown in the list of tidal
stations. Position is not listed in ATT part III.
ML Z0 This is mean level in meters from ATT part III. For most stations
this is a fixed value. Tables of seasonal corrections and
fortnightly variations as required for some stations can be
entered as described below.
ML Seasonal Seasonal corrections to the mean level value as defined for
some ports. If so, this parameter shall be set to ‘Use Table…’
which will open a new view where values for each month can
be input in accordance with the corrections listed in ATT part III.
ML Fortnightly Fortnightly variations in mean level as defined for some ports. If
so, this parameter shall be set to ‘Use Table…’ which will open
a new view where parameters should be entered from a
supplementary table in ATT.
M2 g Harmonic constant from ATT part III.
M2 H.m Harmonic constant from ATT part III. Fixed value used for most
ports.
M2 Seasonal Seasonal depending values of M2 H.m as defined for some
ports. If so, this parameter shall be set to ‘Use Table…’ which
will open a new view where values for each month can be input
in accordance with values listed in ATT part III.
S2 g Harmonic constant from ATT part III.
S2 H.m Harmonic constant meters from ATT part III. Fixed value used
for most ports.
S2 Seasonal Seasonal depending values of S2 H.m as defined for some
ports. If so,
this parameter shall be set to ‘Use Table…’ which
will open a new view where values for each month can be input
in accordance with values listed in ATT part III.