page: 7
USER GUIDE
Update : 7/2/11
0Z NOT FR 0906
Vitrea
3.0/ First startup.
1 -
Opun the battery compartment
2 -
Insert 3 standard AA batteries into the control unit
3 -
Close the battery compartment.
4 -
Connect the IR receiver / display to the control unit
At this stage, you may want to already connect up to 8 sensors to the control unit or you may want
to power it up with no sensors and add them one by one later while the control unit is ON. Wha-
tever you choose, the control unit will behave the same at the first power up:
5 -
Connect the power supply.
6 -
The display will show the clockwise revolving digits
7 -
ASSOCIATE at least one blue key to the control unit
Once this is done, the Altea 3 will start operating and the display will show the slowly blinking dot.
8 -
Install mode: the Altea 3 will then browse through its 8 inputs, starting from input
1. When it finds a sensor with every possible protection properly applied (ie both the
main and nano sensors properly stuck for the Altea 3, or the main, the nano and the
power supply sensors for the Altea 3 Pro) it just skips to the next input (if all 8 inputs
have all sensors and all protections properly applied, then the control unit will just
start its operation).
Graph004
1
2
3
Graph005
4
5
Graph005b
> the LCD display
digits are sequentially
lit clockwise
> the LCD display
digits are sequentially
lit clockwise
Only the first time
the system is powered
Brifly press
the remote
control button
Brifly press
the remote
control button
Blue remote control
Blue remote control
