page: 11
USER GUIDE
Update : 7/2/11
0Z NOT FR 0906
Vitrea
7.0/ Adding a product to an existing configuration
Adding products is automatic. Just stick the appropriate sensors on the product you want to add and connect
it to the control unit.
After 30 seconds, a beep will be heard, telling that the control unit has taken the new product into account.
The display will show what has been detected, toggling between the product number and the 3 bars pattern
(cf graph 005c), and a beep will be heard every 5 seconds.
You will need to validate the addition just like when you validated the various positions at first startup, by
pressing on a valid blue or green key. However, if you don't, the Altea 3 will automatically validate what
it has detected after 30 secs, and the beep will stop.
The new configuration will then be memorized, taking the addition into account.
Graph006
Peel the plastic
film off
Peel the plastic
film off
ADD A PRODUCT
3’'
After 30 secs, the control unit restarts
its operation normally
Taking addition
into account
Stick
the main sensor
Stick
the main sensor
Connect
the power cord
Connect
the power cord
Plug into
Altea 3 or Distributor
Plug into
Altea 3 or Distributor
Stick
the nano sensor
Stick
the nano sensor
Or riefly press the remote control button
Or riefly press the remote control button
1 Bip for the main sensor
2 Bips if a nano sensor is also connected
1 Bip for the main sensor
2 Bips if a nano sensor is also connected
