page: 5
USER GUIDE
Update : 7/2/11
0Z NOT FR 0906
Vitrea
2.0/ The IR receiver / LCD display
The display consists of two 8 segments digit and a dot. It will provide information on your installation, how
it is configured, and will assist in solving problems. This BUS C.U does not work with the 53500 I.R receiver
2.1/ Information provided by the 8 segments digit 53550:
On some occasions (described later on in this user's guide), the display will be toggling between a number
(1 to 8) and a 3 horizontal bars pattern. The number relates to the sensor ("3" means the sensor that is
plugged into input 3). The 3 horizontal bars will tell what is connected and stuck to the product as shown
below
PLEASE NOTE THAT ON THE STANDARD Altea 3 THE BOTTOM BAR WILL NEVER
BE LIT SINCE THERE IS NO PROTECTION ON THE POWER SUPPLY.
Information provided by the dot:
Dot NOT lit: the control unit is OFF, nothing is protected
Dot blinking slowly (every second): control unit ON, no problem detected
Dot blinking quickly: control unit ON, but there is at least one problem that has been detected
2.2/ Other information:
(*) It has NO key associated with it and it has NO configuration in memory
whatsoever.
2.3/ Maximun capacity of the ALTEA 3 BUS control unit installation
1 control unit
9 distributors
2 IR receiver and display
15 mèter BUS lenght maxi
Graph003
The product
having a problem
The LCD display
toggles between
> Mid digit is lit:
Main sensosr
is not working
> Mid digit is lit:
Main sensosr
is not working
The type of
problem
> Top digit is lit:
Nano sensor
is not working
> Top digit is lit:
Nano se
nsor
is not working
type of problem
distributor number
Right digit
Left digit
Graph003b
Clockwise revolving
= control unit blanck (*)
A = ALARM
U = Mains power
supply is OFF
n = WEAK
BATTERIES
H = n + U
O = Control unit
open
