page: 10
Update : 7/2/11
0Z NOT FR 0906
Vitrea
USER GUIDE
At the end of this procedure, the configuration of your installation will be kept in memory by the con-
trol unit (even if the control unit is switched off), and whatever discrepancy with this memorized
configuration will trigger an alarm.
Graph005c
IF what the LCD display tells you,
is what you wanted
(for example you did not
want any telephone on position 1),
VALIDATE
IF what the LCD displays tells you is NOT
what you wanted
(for example, you stuck a nano sensor
on telephone 8, but top digit is lit
(= nano sensor not working),
CORRECT THE PROBLEM
The LCD display automatically
shows the next position on which there is either a missing telephone
or a non working sensor, if any.
If only one telephone is missing or one sensor is not working
> Renew the above steps for each position, until the LCD display shows the blinking red dot.
> System is up and running, fully protected as per your needs.
(*) ALWAYS USE A NEW ADHESIVE WHEN RE-STICKING A SENSOR
Simply add what is missing,
and/or properly re-stick the faulty sensor
(*)
> Mid digit is lit:
Main sensosr is not working
> Mid digit is lit:
Main sensosr is not working
Type of non-working
sensor
> Top digit is lit:
Nano sensor is not working
> Top digit is lit:
Nano se
nsor is not working
Briefly press
the remote
control button
Briefly press
the remote
control button
Blue remote control
Blue remote control
3’'
Automatic acknowledgement
after 3 secs
Automatic acknowledgement
after 3 secs
The product
having a problem
The LCD display
toggles between
The type of
problem
Distributor number
failed
Exemple d’installation en défaut
