700-1000 - B
June - 2010
7
Counter Weights -
The weights for the lift are located in the bottom of the pallet. Remove the restraining
planks with a screwdriver to gain access.
Each weight is approximately 30 lb/13.6 kg. Use caution when lifting. There are finger holds on each
weight to help handling.
Weights leave the factory in good condition; however, they may have shifted during shipping. Inspect the
weights prior to installation to be sure the paint has not been scratched. Use the touch-up paint supplied
to cover any scratches. The weights are cast iron - if the raw surface is exposed to the elements, it can
rust which could stain the pool deck. Inspect the weight stack monthly for any scratches and touch up as
required. Acrylic spray paint can be used in place of the touch up paint.
Place the weights onto the PAL frame as shown in the diagrams. Stack the weights so the feet on the
bottom of the weight nest into the indentation on top. There are three layers of weights, eight per layer.
With the weights in place, attach the restraining harness to the snaps underneath frame as shown in the
diagrams. Assemble the rest of the PAL according to the instructions that follow.
CAUTION: The restraining harness must be correctly attached to frame. Failure to correctly attach the
restraining harness to frame may result in the weights shifting during use.
