background image

700-1000 - B 

 

June - 2010 

17 

All Aquatic Lifting Systems have a three (3) year warranty on the frame, excluding the powder coated paint finish, which may 
become scratched with normal use.  All electronic and motor components, with the exception of batteries, have a full two (2) year 
warranty.  Within the warranty period, S.R.Smith will repair or replace any item deemed to be found defective.  Lift batteries come 
with a one-year pro-rated warranty.  During the first 90 days of ownership, batteries will be covered 100%. If a battery failure occurs 
between day 91 and day 365, batteries are covered at 50% of the original cost.  Normal maintenance and care of the unit, including 
charging of the battery when not in use is recommended.  Do not store the unit, battery or components near or around chemicals. 

The warranty is non-transferable and is subject to the following terms and conditions (View complete S.R. Smith Terms & 
Conditions): 

S.R. Smith shall not be responsible for the cost of removal or replacement of any defective S.R. Smith product, nor for any other 
expenses or for damages which might be incurred in such removal and replacement.   

This warranty specifically excludes fading of materials, microbiological staining of diving boards or pool slides and rust or 
corrosion of any metallic products or parts.  Refer to S.R. Smith care and maintenance instructions for regular 
maintenance and cleaning of S.R. Smith Products.  Maintenance instructions can be found at www.srsmith.com/care.php.

 

This warranty relates only to defects in materials and workmanship and does not include damage or failure resulting from other 
causes, including, but not limited to Acts of God, misuse or abuse, accident or negligence, fire, improper assembly or installation, 
chipping or flaking of powder or vinyl coatings, or ice damage.  Damage induced by the improper use of chemicals is not covered by 
this warranty.  In the event that products are altered or repaired by anyone without the prior written approval of S.R. Smith, all 
warranties are void. 

IMPORTANT: WEIGHT LIMIT ON DIVING BOARDS, JUMP BOARDS, STANDS, SLIDES, LADDERS AND LADDER STEPS 
SHALL BE NOT MORE THAN 250 POUNDS. EXCEPTIONS: FRONTIER IV BOARD AND BASE NOT MORE THAN 400 POUNDS. 
TURBOTWISTER AND TYPHOON SLIDES NOT MORE THAN 275 POUNDS. CYCLONE SLIDE NOT MORE THAN 175 
POUNDS.  VORTEX SLIDES NOT MORE THAN 325 POUNDS. 

S.R. Smith shall not be liable for any consequential, special or incidental damages, including, but not limited to any damages for loss 
of use of pools or injury to person or property, and any claims therefore are hereby specifically disclaimed and excluded. Some 
states do not allow the exclusion or limitation of incidental, special or consequential damages, so the above limitation or exclusion 
may not apply to you. This warranty gives you specific legal rights and you may also have other rights, which may vary from state to 
state. The warranty is extended to, and enforceable only by the original retail purchaser. 

If any S.R. Smith products fail during the warranty period as a result of a defect in material or workmanship covered by this 
warranty, the original retail purchaser must notify S.R. Smith via 

www.srsmith.com/warranty.php

.  This notice from the original retail 

purchaser must contain all pertinent product information as outlined in the warranty claim form.  S.R. Smith will determine if the 
product is to be returned to the factory or will ask that ( 1 ) the defective area and ( 2 ) the part of the product stamped with the serial 
number be removed and returned. Product pieces must be cleaned and returned freight prepaid to S.R. Smith’s facility at either 
1017 SW Berg Parkway, Canby, OR 97013 or 105 Challenger Drive, Portland, TN  37418 as determined by S.R. Smith. 

THE WARRANTY SET FORTH HEREIN IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, WHICH ARE 
HEREBY DISCLAIMED AND EXCLUDED, INCLUDING WITHOUT LIMITATION ANY WARRANTY OF MERCHANTABILITY OR 
FITNESS FOR A PARTICULAR PURPOSE OR USE. 

THE SOLE AND EXCLUSIVE REMEDIES FOR BREACH OF ANY AND ALL WARRANTIES WITH RESPECT TO THE 
PRODUCTS SHALL BE LIMITED TO REPAIR OR REPLACEMENT AT S.R. SMITH’S DESIGNATED FACTORY OR IN PLACE AT 
S.R. SMITH’S OPTION.  IN NO EVENT SHALL S.R. SMITH’S LIABILITY EXCEED THE ENTIRE AMOUNT PAID TO S.R. SMITH 
BY THE ORIGINAL PURCHASER FOR THE FAILED OR DEFECTIVE PRODUCT. 

IN NO EVENT SHALL S.R. SMITH BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL, SPECIAL, INDIRECT, PUNITIVE OR 
EXEMPLARY DAMAGES OR LOST PROFITS FROM ANY BREACH OF THIS LIMITED WARRANTY OR OTHERWISE. 

No representative of S.R. Smith, nor any of its agents, distributors or dealers has any authority to alter in any manner the terms of 
this warranty and S.R. Smith is not responsible for any undertaking, representation or warranty made by any other person beyond 
the warranty expressly set forth in this warranty.  

 

Warranty Procedures 

The S.R. Smith warranty becomes effective on the date of manufacture.

 

Содержание PAL Hi-Lo/250-0000/EU





















Отзывы: