700-9000
6.14.13
28
15. Remove the White Plastic Cap from the stud on the opposite side of the lift and replace it on the
stud from which the Support Arm was removed. Attach the tension arm onto stud with the 1/8”
Thrust Bushing placed between the base bracket and Support Arm. Secure the Support Arm
using the nylon washer, stainless steel washer and lock nut.
15. Switch the control box to the opposite side by removing the torx head screw and detaching the control
box from the mounting bracket. This allows access to the Phillips screws holding the mounting bracket to
the lift frame.
16. Remove both the Phillips screws and replace the mounting bracket to the opposite side of the frame
with the Phillips screws installed on the opposite side of the frame. Replace the Phillips screws where the
mounting bracket was removed.
14
15
16
