700-9700
7.14.2022
24
POOL DECK INSTALLATION FOR THE multiLift2
Ensure the anchors have been installed in the correct location in the pool deck for proper lift operation.
It is recommended that the anchor be installed by a person familiar with installing pool deck equipment.
The pool owner is responsible for ensuring that all applicable ordinances are followed when installing
the lift.
The optimal mounting distance for the deck front anchors is
12.5” / 31.75 cm from the edge of the pool. The
front anchors can be installed up to a maximum of 17
” / 43.18 cm from the edge of the pool. The setback
distance from the pool edge to the front anchor locations varies depending upon pool geometry. The multiLift2 is
designed to be used with simple pool edge designs with deck to water level differences of up to 14.5
” maximum,
see Figure 19.
Please contact S.R.Smith with any questions concerning deck anchor placement or to determine if the multiLift2
is the best choice for your installation.
Figure 19
MINIMUM DISTANCE BETWEEN FLUSH DECK
ANCHORS AND EDGE OF CONCRETE SLAB SHALL NOT
BE LESS THAN FOUR (4) INCHES.
Figure
19
Back View
Side View
8.75 MIN
TO 13.75 MAX
FRONT OF BASE PLATE
TO EDGE OF POOL
12.50 MIN
TO 17.0 MAX
ANCHOR SET BACK
