S.R.Smith BYOS 2, Инструкции по сборке/установке

Страница: 7 / 20

5
SBK-BYOS2 INSTALL | 0419 Copyright ® 2019 S.R.Smith, LLC All rights reserved. | srsmith.com
I N S TA L L AT I O N I N S T R U C T I O N S B YO S 2 S L I D E
SLIDE PLACEMENT
If the slide meets the pool edge at an angle, then the outside curve “Pivot A” has to be at the pool edge. Refer
to Diagram D & E below.
If the slide meets the pool edge straight on, then the end of the exit section should be parallel with the pool edge.
Refer to the Diagram F below.
NOTE: The exit point of the flume can be no higher than 20” above the water.
DIAGRAM D
(NOT TO SCALE)
DIAGRAM E
(NOT TO SCALE)
DIAGRAM F
(NOT TO SCALE)
3” MINIMUM
OVERHANG 3” MINIMUM
OVERHANG
3” MINIMUM
OVERHANG