16
SBK-BYOS2 INSTALL | 0419
Copyright ® 2019 S.R.Smith, LLC All rights reserved. |
srsmith.com
I N S TA L L AT I O N I N S T R U C T I O N S
B YO S 2 S L I D E
BYOS 2 FLUME & ANCHOR SUPPORT HARDWARE
The entry frame support anchor comes with a part specific hardware kit. Use hardware set BYOS2-101-SS.
The 20˚ support anchors all attach to flume sections using the hardware kit BYOS2-102-SS.
BYOS2-101-SS – ENTRY SECTION/HANDRAILS SS HARDWARE KIT
QTY
PART NUMBER
COMPONENT DESCRIPTION
12
H-SS 3/8X1 HB
3/8”-16X1” Hex Bolt Stainless Steel
20
H-SS 3/8 FLT WA
3/8” MS 815 Flat Washer Stainless Steel
12
H-SS 3/8 LOC WA
3/8” Lock Washer Stainless Steel
8
H-SS 3/8 F NUT
3/8” Hex Nut Stainless Steel
1
H-ANTI-SEIZE
Single Use Anti-Seize Packet
BYOS2-102-SS – FLUME TO FLUME SS HARDWARE KIT
QTY
PART NUMBER
COMPONENT DESCRIPTION
7
H-SS 3/8X1-34
3/8”-16X1-3/4” Hex Bolt Stainless Steel
14
H-SS 3/8 FLT WA
3/8” MS 815 Flat Washer Stainless Steel
7
H-SS 3/8 LOC WA
3/8” Lock Washer Stainless Steel
7
H-SS 3/8 F NUT
3/8”-16 Hex Nut Stainless Steel
HARDWARE NOTE:
Use a small dab of anti-seize
lubricant (included) on all
bolt threads.
FIG. 25 (BYOS2-101-SS)
Entry Section/Handrails SS Hardware Kit
FIG. 26 (BYOS2-102-SS)
Flume to Flume SS Hardware Kit
ADDITIONAL ANTI-SEIZE NOTICE:
S.R.Smith adds additional anti-seize packets to BYOS1 & BYOS2 shipments, as follows:
1–5 sections: 1 packet, included in the BYOS-101-COMBO or BYOS2-101-SS kit.
6–10 sections: +1 packet, added to last section before exit*.
11–15 sections: +2 packets, added to last section before exit*.
16–20 sections: +3 packets, added to last section before exit*.
21+ sections: +4 packets, added to last section before exit*.
* BYOS2 exits do not have hardware.
