2
SBK-BYOS2 INSTALL | 0419
Copyright ® 2019 S.R.Smith, LLC All rights reserved. |
srsmith.com
B YO S 2
L I A B I L I T Y D I S C L A I M E R
IMPORTANT NOTICES
LIABILITY DISCLAIMER: This BYOS product provides the customer the opportunity to design a one-of-a-kind
slide, unique to the customer’s preferences. When purchasing this BYOS product, the customer acknowledges
and agrees that he or she has designed and created the specifications for this product. S.R.Smith makes no
claims, representations or warranties, whether expressed or implied, regarding this design of this product, or this
product’s safety, relability, durability, or performance. In no event shall S.R.Smith be liable for any direct, indirect,
punitive, incidental, special, or consequential damages arizing out of or connected with the use or misuse of this
product.
S.R.Smith recommends that you read the BYOS 2 Installation Manual in its entirety before attempting an installation.
• It is highly recommended that provision be made for future maintenance and/or removal of the slide from the
substrate, if necessary. Do not fully encase the slide in concrete or pernanently fixed structure/material.
• Do not construct objects or formations along or over the slide pathyway that obstruct the pathway for sliders
or cause potential harm to the head, arms or legs.
• Minimum recommended head clearance above the slide pathway is 7 feet.
• Minimum BYOS 2 water envelope is 7’ wide (centered on slide) x 13.5’ long x 4.5’ deep
.
• The exit section must be installed with the correct alighnmenet to the pool edge with a minimum overhang
of 3” and should be supported at the fiberglass landing plate.
• Zoom Flume™ water delivery system requires a 1” PVC flex hose. For best performance, the recommended
water flow at the slide is 20-40 GPM, connecting a ball valve in line is recommended for water flow adjustment.
NOTE: Connect the Zoom Flume™ water delivery system to water source and test for leaks or defects prior
to final assembly/ installation.
• See page 16 of installation manual for BYOS 2 Care and Maintenance.
WARNING
• FAILURE TO INSTALL BYOS 2 PRODUCTS SO THAT THE ENTRY SECTION SUPPORT FRAME IS LEVEL,
WILL CAUSE THE DESIGN TO EXCEED THE RECOMMENDED ANGLE OF DESCENT AND MAY RESULT
IN PERSONAL INJURY AND/OR PROPERTY DAMAGE. NO INSTALLED BYOS 2 SLIDE SHOULD EXCEED
A 20 DEGREE SLOPE.
• FAILURE TO INSTALL THE BYOS 2 SLIDE ANCHOR SYSTEM TO THE MINIMUM DEPTH SPECIFIED IN THE
INSTALLATION INSTRUCTIONS OR ALTERATION OF THE BYOS 2 SLIDE ANCHOR SYSTEM WILL CAUSE
STRUCTURAL INSTABILITY AND MAY RESULT IN PERSONAL INJURY AND/OR PROPERTY DAMAGE.
• DO NOT DRILL INTO OR THROUGH ANY BYOS SLIDE SECTION OR ANCHOR OR OTHERWISE MODIFY.
IT WILL WEAKEN THE PART AND VOID THE WARRANTY.
