S.R.Smith aXs2, Руководство пользователя и процедуры технического обслуживания

Страница: 12 / 24

700-3002-BC 10.18.2017
7. Attach the Battery Pack (#4) to the Control Box (#2) by sliding onto the top of the Mounting Plate
and down onto the Control Box. To remove battery, pull slightly away from Mounting plate and lift
Battery Pack off of the Control Box.
8. Rotate Lift so that Mast flanges (shown below) are positioned over the pool deck and not over the
pool.
9. Locate the Actuator Arm Assembly (#12) and insert (2) Bushings (#21) into the holes in the end of
the Actuator Arm closest to its flanges (see image).
10.
Orient the Actuator Arm Assembly (#12), with Bushings installed, to the lower holes in Mast
Flanges and using (1) Hex Head Bolt (#17), (2) Flat Washers (#16) and (1) Nyloc Nut (#22) as
shown below, install the Arm. Tighten the Bolt and Nut using (2) 9/16” Box Wrenches.
11. Verify that Actuator (#1) is already attached to base of Mast, with (1) Hex Head Bolt (#23), (2)
Washers (#16), and (1) Nyloc Nut (#22).
(#2)
(#4)