S.R.Smith aXs2, Руководство пользователя и процедуры технического обслуживания

Страница: 8 / 24

700-3002-BC 10.18.2017
The Emergency Alert (audible and LED) can be activated by pressing any two buttons on the
hand control at the same time (provided with the lift). This will stop all lift movement and activate
the audible alert and the Red LED will flash. Once both buttons are released, the lift will return to
normal operation and the emergency audible alert will silence.
For additional information on the LiftOperator controller, see LiftOperator manual 700-0500.
Battery Pack
- The battery pack is located on top of the Control Box and is removable.
To remove - pull the battery pack away from the mounting plate so that the latch on the battery
pack clears the side tabs on the mounting plate - then lift the battery pack up and away from the
Control Box.
To replace - align the battery pack with the mounting plate so that the latch will drop over the
center tab and that the bottom of the battery pack will fit in the recessed area on top of the Control
Box. Lower the battery pack in place so that the latch is fully captured by the mounting plate and
the battery pack drops fully seated onto the Control Box.
The battery pack should be charged daily. Do
not allow battery to fully discharge, as it will
shorten battery life. Whenever battery is
removed from Control Box or lift is not in use it
is important to connect battery to the charger.
This ensures battery is fully charged and ready
for use.
The battery charger has an LED indicator to
show charging status. The following describes
LED indicator operation.
Amber Light Flashing – The amber light
flashing indicates that the battery charger has
AC power and the microprocessor is
functioning properly. If the amber light