S.R.Smith aXs2, Руководство пользователя и процедуры технического обслуживания

Страница: 16 / 24

700-3002-BC 10.18.2017
USING THE aXs2 LIFT
Obey all User Instructions listed in the Owner’s Manual whenever using lift. Obey all Caution,
Warning, Operating Instruction(s) and Labels located on the lift whenever it is in use. It is the
responsibility of the lift Owner to ensure that the correct safety procedures have been put in place
and a risk assessment carried out.
If a User is mentally challenged or has severe physical
disabilities these issues must be taken into account to determine the number of persons required
to complete the transfer onto the seat and the number of persons required to be in the water,
ready to receive the User.
If the aXs2 will be used by a disabled person living on their own, a communication device should
be installed in the area of use to call for assistance in the event of an emergency. Only persons
healthy enough for water activities should use the aXs2. Users should consult with their physician
to determine if water activities are appropriate for the User. Keep fingers and hands clear of lift
arms during use.
aXs2 Transfer diagram
TRANSFERRING
Once the unit is positioned for use, use the following procedure to transfer to the seat and into the water.
Only persons healthy enough for water activities should use the aXs2. Users should consult with their
physician to determine if water activities are appropriate for the User:
•
Rotate the seat to either side of lift for best transfer position (3 o’clock or 9 o’clock).
•
Raise or lower the seat to proper transfer height.
•
Transfer onto the seat, ensuring that the user’s weight is centered on seat. Armrests can be
rotated up if necessary. If user has a wheelchair, keep the wheelchair close by for easy retrieval.
•
Fasten Seat Belt - thread loose end of belt strap through buckle - pull tight - to close - press latch
down on belt material.
•
Raise seat to allow enough leg room for rotation.
•
Rotate seat to the 12 o’clock position, over the water.
•
Lower the seat into the pool. The waterproof hand control can remain connected to seat if
swimmer is operating lift.
•
Unfasten Seat Belt - grasp latch and lift up, pull loose end from latch.
•
When finished, return to the seat, ensuring user’s weight is centered on seat.
•
Fasten Seat Belt.
•
Raise seat to allow enough leg room for rotation.
•
Rotate seat to original transfer position.
•
Raise or lower seat to proper transfer height.
•
Unfasten Seat Belt.
•
Transfer off of the seat.
360° ROTATION