S-Klima CompTrol, Техническое руководство

Страница: 30 / 126

30 CompTrol Interface V4.0.x | Issue 21-05-2021 | 1000932
Program overview
6 Program overview
The CompTrol Interface offers nine different programs for adapting the expansion module to indi -
vidual requirements. The programs are activated via DIP switches S1-1 to S1-4 . You can find the
precise DIP switch configurations in the section dealing with each program or as a summary in
“Table 7: Program selection via DIP switches” on page 21 .
The following programs are available:
Program Description
Program 0 Temperature setpoint definition via analog signal
Program 2 Temperature setpoint definition with window contact function
Program 3 Temperature setpoint definition for equipment rooms with temperature limit alarm
Program 4 Temperature setpoint definition with hotel remote control function
Program 5 Temperature setpoint definition with lockout function
Program 6 Temperature setpoint definition for heat exchanger connection module
Program 7 Temperature setpoint definition without signal boundary value monitoring
Program 8 Direct frequency request
Program 9 Direct frequency request with cascading
Program 10 Direct frequency request with the CompTrol Master
Table 12: Program overview