Ryobi RY15522, Руководство оператора

Страница: 10 / 30

8 — English
MAINTENANCE
WARNINg:
When servicing, use only identical replacement parts.
Use of any other parts may create a hazard or cause
product damage.
WARNINg:
Always wear safety goggles or safety glasses with side
shields during power tool operation or when blowing
dust. If operation is dusty, also wear a dust mask.
WARNINg:
Before inspecting, cleaning, or servicing the machine,
shut off engine, wait for all moving parts to stop, and
disconnect spark plug wire and move it away from spark
plug. Failure to follow these instructions can result in
serious personal injury or property damage.
gENERAL MAINTENANCE
Avoid using solvents when cleaning plastic parts. Most
plastics are susceptible to damage from various types of
commercial solvents and may be damaged by their use. Use
clean cloths to remove dirt, dust, oil, grease, etc.
WARNINg:
Do not at any time let brake fluids, gasoline, petroleum-
based products, penetrating oils, etc., come in contact
with plastic parts. Chemicals can damage, weaken or de-
stroy plastic which may result in serious personal injury.
You can often make adjustments and repairs described
here. For other repairs, have the trimmer serviced by an
authorized service dealer.
REPLACINg PRO CUT II STRINg hEAD
See Figure 8.
 Stop the engine and disconnect the spark plug wire.

Remove currently installed string head.
  Install the string head on the drive shaft until fully seated.

Install the spool retainer and turn clockwise to secure.
 Install string as described previously in this manual.
ATTAChINg ThE STORAgE hANgER
See Figure 9.
There are two ways to hang the attachment for storage.

To use the hanger cap, push in the button and place the
hanger cap over the end of the attachment shaft. Slightly
rotate the cap from side to side until the button locks into
place.

The secondary hole in the attachment shaft can be used
for hanging purposes as well.
STORINg ThE ATTAChMENT
 Store the attachment in a well-ventilated place that is
inaccessible to children.

Keep away from corrosive agents such as garden chemi-
cals and deicing salts.
MAKE THE MOST OF YOUR PURCHASE!
Go to www.ryobitools.com and register your new tool on-line.
Your product has been fully tested prior to shipment
to ensure your complete satisfaction.
For any questions about operating or maintaining
your product, call the Ryobi Help Line!
To register your Ryobi product by regular mail, please print the following information on a 3 in. x 5 in. card or
standard postcard: your name, mailing address, phone numbers, email address, Ryobi product(s) purchased
with item number from package, and serial number for each product. Mail the card to: Techtronic Industries
North America, Inc., Attn. Ryobi Registration, 1428 Pearman Dairy Road, Anderson, SC 29625.To receive infor-
mation on our company and products, please include the following statement on your registration card: “Send
me information on your products and company using the contact information I am providing with this product
registration.”