![background image](http://html1.mh-extra.com/html/ryobi/rmx001/rmx001_operators-manual_1505364013.webp)
13 − English
ASSEMBLY
Fig. 12
Fig. 13
DRUM
TO
TIGHTEN
SHAFT
SECURING THE DRUM
See Figure 12.
CAUTION:
Double check all setups. Make sure that the legs, pivot
bracket, wheels, motor assembly, and handles are
installed correctly prior to installing the drum.
Locate the drum.
Tighten the bolt at the rear of the pivot bracket to
prevent the drum from rotating.
With the help of a second person, place the drum onto
the motor shaft.
NOTE:
The drum is heavy. To avoid back injury, lift with
your legs, not your back, and get help when needed.
Screw the drum onto the motor shaft by turning it
clockwise. Tighten securely.
INSTALLING THE MIXING TINES
See Figure 13.
Locate the following parts:
Mixing Tine ................................................................... 2
Nut (12 mm) in plastic bag (D) ...................................... 4
Bolt (Phillips Hd.) in plastic bag (D) .............................. 4
Place the mixing tines into the drum with the angled ends
pointing toward the inside of the drum.
Align the holes in the tines with the holes in the drum.
Install nuts and bolts as shown. Tighten securely.
PIVOT
BRACKET
MOTOR
ASSEMBLY
MIXING
TINE
NUT
NUT
BOLTS