19 − English
TROUBLESHOOTING
PROBLEM
POSSIBLE CAUSE
SOLUTION
Mixer won’t start
Power supply not connected
On/off switch is in the off position
Motor overloaded and circuit breaker
is tripped
Connect to power supply.
Put on/off switch in on position.
Allow motor to cool, press the circuit
breaker reset button and put on/off switch
in on position.
NOTE:
If the mixer still does not start,
unplug the tool and empty some or all of
the batch load.
Do not force the mixer.
Mixer stops during operation
Power supply is disconnected
Motor overloaded and circuit breaker
is tripped
Reconnect power supply.
Allow motor to cool, press the circuit
breaker reset button and put on/off switch
in on position.
NOTE:
If the mixer still does not start,
unplug the tool and empty some or all of
the batch load.
Do not force the mixer.
Excessive noise or vibration while
drum is spinning
Pivot pin and/or lock handle is not secure Stop the motor and fully insert the pivot
pin and/or lock handle to lock the drum
in place.
Drum lowers unexpectedly during
operation
Pivot pin and/or lock handle is not secure Stop the motor and fully insert the pivot
pin and/or lock handle to lock the drum
in place.
