background image

991000625
8-28-20 (REV:05)

OPERATOR’S  MANUAL / 5-1/2 in., 18 VOLT CIRCULAR SAW

MANUEL  D’UTILISATION / SCIE CIRCULAIRE DE 140 mm (5-1/2 po) 18 V 
MANUAL DEL OPERADOR / SIERRA CIRCULAR DE 140 mm (5-1/2 pulg.) 18 V

P505

RYOBI is a registered trademark of Ryobi Limited and is used pursuant to a license granted by Ryobi Limited.

RYOBI est une marque déposée de Ryobi Limited et est utilisée en vertu d’une licence accordée par Ryobi Limited.

RYOBI es una marca registrada de Ryobi Limited y se utiliza conforme a una licencia otorgada por Ryobi Limited.

Para obtener servicio, comprar piezas de repuesto, localizar un centro de servicio autorizado  

y obtener Servicio o Asistencia Técnica al Consumidor:

Visite

 www.ryobitools.com

 (en la EE.UU.) o 

www.ryobitools.mx 

(en México)  

o llame al 

1-800-525-2579 

(en la EE.UU.) o 

01-800-843-1111 

(en México).

Si hay alguna pieza o accesorios dañada o faltante, no devuelva este producto a la tienda.  

Llame al 

1-800-525-2579

 (en la EE.UU.) o 

01-800-843-1111 

(en México) para servicio técnico inmediato.

Obtenga su modelo y número de serie de la placa de datos del producto. 

Este producto está cubierto con una garantía limitada de 3 años. Se solicita prueba de la compra

.  

NÚMERO DE MODELO* _______________  NÚMERO DE SERIE ____________________________

*El número de modelo que figura en el producto podría tener letras adicionales al final. Estas designan información  

de fabricación y deben suministrarse cuando llame para obtener asistencia o servicio.

To request service, purchase replacement parts,  

locate an Authorized Service Center or obtain Customer or Technical Support:  

Visit 

www.ryobitools.com

 or call 

1-800-525-2579

If any parts or accessories are damaged or missing, do not return this product to the store.  

Call 

1-800-525-2579

 for immediate service.

Please obtain your model and serial number from the product data plate.  

This product is covered under a 3-year limited Warranty. Proof of purchase is required.

 MODEL NUMBER* _______________  SERIAL NUMBER ____________________________

*Model number on product may have additional letters at the end. These letters designate  

manufacturing information and should be provided when calling for service.

Pour faire une demande de réparations ou obtenir des pièces de rechange, trouver un  

Centre de réparations agréé pour obtenir un soutien technique ou le Service à la clientèle : 

Visiter 

www.ryobitools.com

 ou en téléphonant au 

1-800-525-2579

Si des pièces ou accessoires sont manquantes ou endommagées, ne pas retourner  

ce produit au magasin. Appeler immédiatement au 

1-800-525-2579

 pour obtenir de l’aide.

Inscrire les numéros de modèle et de série inscrits sur la plaque d’identification du produit. 

Ce produit est couvert par une garantie limitée de trois (3) ans. Une preuve d’achat est exigée

.

 NUMÉRO DE MODÈLE* _______________  NUMÉRO DE SÉRIE ____________________________

*Le numéro de modèle sur le produit peut contenir des lettres supplémentaires à la fin. Ces lettres désignent  

les informations du fabricant et doivent être fournies lors d’un appel de demande de service.

ONE WORLD TECHNOLOGIES, INC.

 

P.O. Box 1288, Anderson, SC 29622 • Phone 1-800-525-2579  

États-Unis, Téléphone 1-800-525-2579 • USA, Teléfono 1-800-525-2579

www.ryobitools.com

Содержание P118B



















































































Отзывы: