Ryobi P118B, Руководство оператора

Страница: 17 / 82

3 — English
GENERAL POWER TOOL
SAFETY WARNINGS
DRILL/DRIVER / IMPACT DRIVER SAFETY WARNINGS
P215/P215VN DRILL/DRIVER
SAFETY INSTRUCTIONS FOR ALL
OPERATIONS

Hold the power tool by insulated gripping surfaces,
when performing an operation where the cutting ac-
cessory or fasteners may contact hidden wiring.
Cutting
accessory or fasteners contacting a “live” wire may make
exposed metal parts of the power tool “live” and could give
the operator an electric shock.
SAFETY INSTRUCTIONS WHEN USING LONG
DRILL BITS

Never operate at higher speed than the maximum
speed rating of the drill bit. At higher speeds, the bit is
likely to bend if allowed to rotate freely without contacting
the workpiece, resulting in personal injury.

Always start drilling at low speed and with the bit tip in
contact with the workpiece. At higher speeds, the bit is
likely to bend if allowed to rotate freely without contacting
the workpiece, resulting in personal injury.

Apply pressure only in direct line with the bit and do
not apply excessive pressure. Bits can bend causing
breakage or loss of control, resulting in personal injury.
P235A/P235AVN IMPACT DRIVER
SAFETY INSTRUCTIONS FOR ALL
OPERATIONS

Hold the power tool by insulated gripping surfaces,
when performing an operation where the fastener may
contact hidden wiring. Fasteners contacting a “live” wire
may make exposed metal parts of the power tool “live” and
could give the operator an electric shock.
ADDITIONAL SAFETY INSTRUCTIONS

Know your power tool. Read operator’s manual care-
fully. Learn its applications and limitations, as well as
the specific potential hazards related to this power tool.
Following this rule will reduce the risk of electric shock, fire,
or serious injury.

Always wear eye protection with side shields marked
to comply with ANSI Z87.1 when assembling parts, op-
erating the tool, or performing maintenance.
Following
this rule will reduce the risk of serious personal injury.

Protect your lungs. Wear a face or dust mask if the
operation is dusty.
Following this rule will reduce the risk
of serious personal injury.

Protect your hearing. Wear hearing protection during
extended periods of operation. Following this rule will
reduce the risk of serious personal injury.

Keep cutting tools sharp and clean.
Properly maintained
cutting tools with sharp cutting edges are less likely to bind
and are easier to control.

Use the power tool, accessories and tool bits etc. in
accordance with these instructions, taking into account
the working conditions and the work to be performed.
Use of the power tool for operations different from those
intended could result in a hazardous situation.

Keep handles and grasping surfaces dry, clean and
free from oil and grease. Slippery handles and grasping
surfaces do not allow for safe handling and control of the
tool in unexpected situations.
BATTERY TOOL USE AND CARE

Recharge only with the charger specified by the manu-
facturer. A charger that is suitable for one type of battery
pack may create a risk of fire when used with another
battery pack.

Use power tools only with specifically designated bat-
tery packs. Use of any other battery packs may create a
risk of injury and fire.

When battery pack is not in use, keep it away from
other metal objects, like paper clips, coins, keys, nails,
screws or other small metal objects, that can make a
connection from one terminal to another. Shorting the
battery terminals together may cause burns or a fire.

Under abusive conditions, liquid may be ejected from
the battery; avoid contact. If contact accidentally oc-
curs, flush with water. If liquid contacts eyes, addition-
ally seek medical help. Liquid ejected from the battery
may cause irritation or burns.

Do not use a battery pack or tool that is damaged or
modified. Damaged or modified batteries may exhibit
unpredictable behavior resulting in fire, explosion or risk
of injury.

Do not expose a battery pack or tool to fire or exces-
sive temperature. Exposure to fire or temperature above
265°F may cause explosion.

Follow all charging instructions and do not charge the
battery pack or tool outside the temperature range
specified in the instructions. Charging improperly or at
temperatures outside the specified range may damage the
battery and increase the risk of fire.
SERVICE

Have your power tool serviced by a qualified repair
person using only identical replacement parts. This will
ensure that the safety of the power tool is maintained.

Never service damaged battery packs. Service of battery
packs should only be performed by the manufacturer or
authorized service providers.
GENERAL POWER TOOL SAFETY WARNINGS
SAFETY INSTRUCTIONS FOR DRILLS / IMPACT DRIVERS
P215/P215VN DRILL-DRIVER AND P235A/P235AVN IMPACT DRIVER