RVR Solar TEX-LCD Series, Дополнительное руководство

Страница: 23 / 134

/TLM-TEX & RDMODGSM-TEX
3 / 18 User Manual Rev. 1.2 - 18/04/08
EX2.
TLC ID:01-Station Name-
Alarm Fwd Power-
RFL Power OK-
Over Temp OK-
Alarm Audio -
Alarm Mains -
1.2 Telemetry
Equipment telemetry consists in the remote monitoring of all operating parameters
and can only be achieved through serial cable or modem connection to the
“TELECON” software.
1.3 Remote control
When the exciter is connected to an internal or external telemetry unit, it can be
controlled from a PC with a suitable modem connection.
Fig.1.2: Example of Modem-to-PC connection
The “TELECON” software establishes connection with the station through a phone
line and enables the following remote operations: alarm reset, transmitter power
on/power off, power supply reduction, dummy load testing, etc., data evaluation
to locate possible faults, identification of parts required for repair.
An alternative remote controlling option uses SMS messaging through a common
GSM phone, in which case the equipment will respond as indicated in table 1.2.
Before querying the system using SMS messages, establish a connection using
the “TELECON” software and set the provider service centre number and the
telephone numbers authorised to send these commands to the devices.