RVR Solar TEX-LCD Series, Дополнительное руководство

Страница: 122 / 134

16
/
24 User Manual
Rev. 1.1 - 06/05/16
/TLW-TEX-E-2HE & /TLW-TEX-E-3HE
ELETTRONICA
In cases where the parameter is a read-only, and you can not change it, it will be
indicated by a red X over the icon reference. In some cases to apply a particular
change, it is necessary to click on the OID item “Apply Changes”.
Note : In the following examples is used a MIB browser of ManageEngine, but
any MIB Browser can be used.
2.1.1 Reading and Settings of parameters
The description of each variable is specified inside MIB, which are subsequently
reported in the description box (Description) at the end.
Menu 2
The telemetry system is capable to sending Trap up to two different addresses.
Different addresses can be set using the OID in major MIB, in this case:
• IP address for the destination of the Trap.
2.2 SPECIFIC MIB Description
The SPECIFIC MIB reads and manages the parameters administrated by /TLW-
TEX-E-2HE & /TLW-TEX-E-3HE
included in transmitter station.