RVR Solar TEX-LCD Series, Дополнительное руководство

Страница: 21 / 134

/TLM-TEX & RDMODGSM-TEX
1 / 18 User Manual Rev. 1.2 - 18/04/08
1. General Description
The telemetry option, whether internal or external, supports connectivity to the
whole range of units of RVR’s
TEX-LCD
and
TEX-LIGHT
family of products.
In the continuation, unless that for the different versions there are specific
informations, the versions /TLM-TEX2HE (internal telemetry option for the 2 unit
TEX-LCD series) and /TLMTEX3HE (internal telemetry option for the 3 unit TEX-
LCD series) will be called /TLM-TEX ; similarly the RDMODGSM-TEX (external
telemetry option for the series
TEX-LCD
) and its variant
RDMODGSM-TEX.USA
(variant for american market) will be called simply RDMODGSM-TEX .
This section describes the features introduced with versions /TLM-TEX (option
with internal telemetry) and
RDMODGSM-TEX
(option with external telemetry)
and the necessary steps for their proper configuration.
The telemetry option supports:
Remote alarm reporting by sending SMS messages through a GSM modem
or through a PSTN modem (dial-up) by sending an alarm message string to a
connected PC.
Telemetry, with all equipment parameters sent to the “TELECON” software
through an RS232, GSM or PSTN connection;
Remote controlling through an RS232, GSM or PSTN connection to the
“TELECON” software or through certain predetermined SMS messages.
1.1 Remote alarm monitoring
Alarm generation parameters are listed below:
Exciter output power (forward power good “PgD”);
Reflected power at the exciter (reflected power good “PgR”);
Temperature state (OVER TEMPERATURE);
Audio Signal Level;
Mains voltage state (present or missing).
Factory default settings are as follows:
ALARM TIME THRESHOLD
Forward Power (Fwd Pwr) 25 Sec. Power Good (PgD)
Reflected Power (Rfl Pwr) 25 Sec. Power Good (PgR)
Audio 325 Sec. 20 kHz
Over Temperature 25 Sec. 72°C
Mains Power (Mains) 25 Sec.
Table 1.1
An inhibit time (start time) after power-on is provided to ensure false alarm
prevention. When this inhibit time times out, the thresholds of alarm generation
parameters are checked and remote alarms are sent if needed.
•
•
•
•
•
•
•
•
•