RVR Solar TEX-LCD Series, Дополнительное руководство

Страница: 25 / 134

/TLM-TEX & RDMODGSM-TEX
5 / 18 User Manual Rev. 1.2 - 18/04/08
1.4 Arrangement of RDMODGSM-TEX mains power supply
WARNING: Disconnect mains power supply before beginning these
procedures.
The power supply unit (please see section 4.1 for a detailed description) has its
own internal voltage selection block; check the voltage selection block to ensure
that is properly rated for the power mains, if the mains is different from that
specified in the process of order, and change it as required to match mains
voltage.
Check that the voltage value available corresponds with the voltage value setting
on the equipment (also listed in Test Table), verifying, and possibly modifying
appropriately with the equiment disconnected from the power mains , the
position of voltage selection block place internally (see fig. 4.1 - position [5]) after
the cover of the machine had been unscrewing.
Fig.1.3: Position of voltage selection block inside the RDMODGSM-TEX
Move the position of the following wires given in the table below, only in case is
necessary to change the value of power supply.
Fig.1.4: Example of electrical connections to voltage selection block for 220 or 110V
When all is done put the cover, putting all the screws, then connect the mains power
connector (VDE) placed in the back of the equipment (see fig. 3.2 - position [1]).