TRAMPOLINE FRAME ASSEMBLY
Step 4 – Side Frame Assembly
A. Connect Corner Frame-Left (# 5) and Corner Frame-Right (# 6) to Short Frame with Leg Socket (# 4) using
Arc Washer (# G), Spring Lock Washer (# E), Screw (# F) and Allen Wrench (# I) as shown in FIGURE 5.
Please make sure all holes for springs are facing upward. Repeat in the same manner for the other set.
B. Attach the assembled Side Frames on both sides to form the trampoline frame as shown in FIGURE 6.
FIGURE 5
# G
# E
# F
# I
# 4
#6
# 5
FIGURE 6
# 6
# 4
# 5
# 5
#6
#4
17
TRAMPOLINE FRAME ASSEMBLY
Step 4 – Side Frame Assembly
A. Connect Corner Frame-Left (# 5) and Corner Frame-Right (# 6) to Short Frame with Leg Socket (# 4) using
Arc Washer (# G), Spring Lock Washer (# E), Screw (# F) and Allen Wrench (# I) as shown in FIGURE 5.
Please make sure all holes for springs are facing upward. Repeat in the same manner for the other set.
B. Attach the assembled Side Frames on both sides to form the trampoline frame as shown in FIGURE 6.
FIGURE 5
# G
# E
# F
# I
# 4
#6
# 5
FIGURE 6
# 6
# 4
# 5
# 5
#6
#4
17
5B
TRAMPOLINE FRAME ASSEMBLY
C. Connect Short Extension Tube (# 14) to the two ends and Long Extension Tube with Compressed End (#
16) to the center. Secure all parts using Arc Washer (# G), Spring Lock Washer (# E), Screw (# F) and Allen
Wrench (# I) as shown in FIGURE 9.
D. Connect Short Extension Tube with Reinforced Ring (# 13) to the two ends and Long Extension Tube (# 15)
to the center. Secure all parts using Arc Washer (# G), Spring Lock Washer (# E), Screw (# F) and Allen
Wrench (# I) as shown in FIGURE 10. Repeat in the same manner for the other set of Side Leg Support.
FIGURE 9
# G # E # F # I
# 14
# 14
# 16
FIGURE 10
# G # E # F # I
# 13
# 15
# 13
19
5C
5D
TRAMPOLINE FRAME ASSEMBLY
Step 5 –Side Leg Support Assembly
A. Lay out all parts shown below in FIGURE 7.
B. Connect Left L-Shape Base (# 10) and Right L-Shape Base (# 11) to the two ends of T-Shape Base (# 12)
using Arc Washer (# G), Spring Lock Washer (# E), Screw (# F) and Allen Wrench (# I) as shown in FIGURE 8.
FIGURE 7
# 13
# 10
# 12
# 11
# 13
# 14
# 15
# 16
# 14
# I
# F
# E
# G
FIGURE 8
# 10
# 12
# 11
18
TRAMPOLINE FRAME ASSEMBLY
C. Connect Short Extension Tube (# 14) to the two ends and Long Extension Tube with Compressed End (#
16) to the center. Secure all parts using Arc Washer (# G), Spring Lock Washer (# E), Screw (# F) and Allen
Wrench (# I) as shown in FIGURE 9.
D. Connect Short Extension Tube with Reinforced Ring (# 13) to the two ends and Long Extension Tube (# 15)
to the center. Secure all parts using Arc Washer (# G), Spring Lock Washer (# E), Screw (# F) and Allen
Wrench (# I) as shown in FIGURE 10. Repeat in the same manner for the other set of Side Leg Support.
FIGURE 9
# G # E # F # I
# 14
# 14
# 16
FIGURE 10
# G # E # F # I
# 13
# 15
# 13
19
x2
x2
x2