5. Plug the motor unit into the power socket.
6. Put the ingredients into the jug. Do not fill it past the 1.5L / 1500ml mark. If you
do, the contents may force the lid off when you start the motor.
Fitting the Lid
1. Always fit the lid to the jug before using it.
2.
Press the lid well until the flanges are well fixed in the jug.
3.
Put the measuring cap into the hole in the lid and press it down to fit properly.
4.
It is not a good idea to run the blender without the cap, especially if only solid
ingredients are used. They may be ejected through the hole once they hit the
blades.
The Operating Control
Turn the control knob clockwise to the speed you require:
“0” / “OFF” position
“1” position - slow,
“2” position - Max
To stop operation, turn the switch to
“0” / “OFF”
position. Wait until the motor stops completely
then remove the jug from the body.
Unplug the blender after use.
Open indicator
Locked safe-to-use indicator
!
Don’t remove the lid from the jar
while the blender is on
Stop the blender before adding new
ingredients or use the measuring
cup to add ingredients.
!
