FITTING THE SPLASH GUARD
Hold the splash guard by the feeding chute.
Fit the first latch on the splashguard (the latch nearest to the feeding chute) over the
notch on the head.
Push the opposite side of the splash guard upwards until the second latch clicks into
place onto the notch at the rear of the head.
REMOVING THE SPLASH GUARD
Carefully pull down the rear of the splashguard to release the rear latch from the
notch on the rear of the head
With the rear latch now disengaged, the splashguard can be lowered and removed
from the head.
CHUTE COVER
Caution: Do not insert fingers or utensils into the feeding chute at any time.
To avoid spatter, ensure the chute cover is fitted when the Pro-Mix is in use.
The chute cover sits on top of the feeding chute on the splash guard.
Lift the chute cover off to add ingredients
BOWL
Caution: Only use the bowl supplied - do NOT attempt to use any other bowl.
The head must be raised to allow for fitting or removing the bowl (See “Raising the
Head” Section).
Note: It is much easier to fit and remove the bowl without the mixing accessories
fitted.
FITTING THE BOWL
Fit the bowl in the space provided in the Pro-Mix Base.
Turn the bowl clockwise to lock it in place. The two handles will be facing to the front
and rear when the bowl is correctly locked into place.
REMOVING THE BOWL
Turn the bowl anti-clockwise to release it from its fittings.
Lift it out of the Pro-Mix base.
MIXING ACCESSORIES
Caution: Fit and remove the mixing accessories with the Pro-Mix head raised and
ensure the unit is switched off and unplugged.
FITTING ACCESSORIES
Ensure the Pro-Mix is switched off and unplugged.
Raise the head (See “Raising the Head” section)
Select the appropriate accessory.
Push the top of the accessory into the mixing accessories drive and turn it anti-
clockwise to lock it into place.
5
Содержание Pro-Mix RHSB032
Страница 66: ......