Russell Hobbs Pro-Mix RHSB032, Инструкции и гарантия

Страница: 8 / 66

BEFORE FIRST USE
All parts of the Pro-Mix need to be thoroughly cleaned before being used for the first
time. (See “
Care and maintenance ” section).
POSITIONING
• Place the Pro-Mix on a firm, stable, level surface.
• Position the power cord away from the edge of tables or countertops so it cannot be
tripped over or caught.
RAISING THE HEAD
Note: Accessories such as the blender should not be attached when raising the
head.
• Ensure the Pro-Mix is switched off and unplugged.
• Turn the head release lever anti-clockwise to the unlock position.
• The head will lift, with your assistance, allowing removal/replacement of the stainless
steel bowl and/or mixing accessories.
• At its uppermost position the head will lock into place and the head release lever will
return to the lock position.
LOWERING THE HEAD
Caution: Keep hands and items clear of the head pivoting
area to avoid injury or damage to the appliance.
• Ensure the required mixing accessory is correctly fitted and
the mixing bowl is in position. (See “
Bowl ” and “ Mixing
Accessories ” section)
• Turn the head release lever anti-clockwise to the
unlock position.
• Gently lower the head by pressing down on the top of the
Pro-Mix until it locks into position.
• The head release lever will return to the lock position.
SPLASH GUARD
The mixing bowl can be used with or without the splash guard. It is recommended to
use the mixing bowl with the splash guard and chute cover fitted to avoid spatter.
• Ensure the Pro-Mix is switched off and unplugged.
• Raise the head. (See “
Raising the head ” section)
• Remove any mixing accessories from the mixing accessory drive.
• The splash guard fits onto the underside of the head, above the mixing accessory
drive.
4