Russell Hobbs 17892, Инструкция по эксплуатации

Страница: 14 / 16

14
dishwasher
23 You may wash the basket in a dishwasher.
24 If you use a dishwasher, the harsh environment inside the
dishwasher will affect the surface finishes. The damage should be
cosmetic only, and should not affect the operation of the fryer.
drying the lid
25 After washing, stand the lid sideways, at an angle, like a ladder
against a wall, to drain thoroughly.
26 The underside of the lid should be facing the “wall”.
27 Leave it in a warm kitchen for at least 12 hours to drain.
28 Check that there is no moisture left in or around the lid before
replacing it on the fryer.
29 Moisture will make the hot oil foam, and maybe even overflow.
reassembly
30 Before reassembly, shake the lid to check whether there’s any
water still inside it. If there is, leave it to drain properly.
31 Lower the lid into the lid mounts on the rear of the fryer.
32 Slide the basket down into its mounts on the front of the fryer.
33 Close the lid.
34 Press the handle release button, and lower the handle.
35 Replace the filter, with the black filter on top.
36 Replace the filter cover and press down to secure it in place.
cable storage
37 You may wind the cable round the cable
storage at the rear of the fryer.
38 Unwind the cable fully before use.
discolouration
39 With use, the basket and element will discolour. This is inevitable,
harmless, and won’t affect the operation of the fryer.