Safety
information
5
Safety information
Read the safety precautions in this manual befor installing, operating or
servicing this product.
The following symbols are used to identify important safety information:
Caution! Safety
hazard. Risk of
severe injury or
death.
Caution! Burn
hazard. Hot
surface. Do not
touch.
Danger!
Hazardous
voltage. Contact
will cause electric
shock.
Caution! Fire
hazard.
Warning! This product is not for household use. It presents risks of injury due
to electric shock, burns, falls and respiratory problems!
Read this manual before operating the system, follow the safety precautions
listed below, and observe all warnings in this manual and printed on the system.
Use the system only as described in this manual and in accordance with local
laws and regulations.
If you have questions about how to operate the system safely, or if you have
followed the instructions in this manual and the system is malfunctioning, please
contact Martin Service.
Preventing electric shocks
•
Always ground (earth) the system electrically.
•
Use only a source of AC power that complies with local building and
electrical codes, and that has both overload and ground-fault protection.
•
Before connecting the system to power, check that the voltage indicated
on the system’s serial label matches your local AC power voltage. If your
AC power voltage does not match, do not use the system. Contact Martin
Service for assistance.
•
Before using the system, check that all power distribution equipment and
cables are in perfect condition and rated for the current requirements of
all connected devices.
•
If the system or any cables connected to it are in any way damaged,
defective, wet, or show signs of overheating, stop using the system and
contact Martin Service for assistance. If the supply cord is damaged, it
must be replaced by a special cord or assembly available from the
manufacturer or its service agent.
•
Disconnect the system from AC power before servicing and when not in
use.
