Control
settings
17
Control settings
Overvi ew
The digital display on the side of the base unit allows you to configure the system
using option menus.
The brightness of the display can be changed to LOW, NORM or HIGH using the
DISP menu option.
Setting Fog Run modes
The RUNF menu sets the operational mode of the Fog heads in the system, and
can also be used to shut down the heaters in the heads. Settings are Off
(shutdown, heaters off), Standby (heaters remain on), Timer mode or Continuous
mode.
Use the Menu Previous / Next buttons to select the
option.
Use the Up/Down buttons to select
.
Press the Enter button to store the setting. The display shows
.
Selecting OFF will disable the heaters on the unit.
Setting output d ensi ty fo r Fog h eads
Use the Menu Previous / Next buttons to select the
option.
Use the Up/Down buttons to select the density from
–
.
Press the Enter button to store the fog setting. The display shows
.
If you want to temporarily change the fog density, do not press
Enter. The fog setting will go back to its stored value next time the
system is powered up. This applies to all options.
Setting Haze Run mod es
The RUNH menu sets the operational mode of the Haze heads in the system,
either Standby, Timer mode or Continuous mode.
Use the Menu Previous / Next buttons to select the
option.
Menu previous/next
buttons
Value down/up
buttons
Digital display
Enter/store button
Quick access buttons
PRIME1 PRIME2 PRIME3 PRIME BASE
