6
MAINTENANCE
Warning:
Always cut off the power supply before cleaning and bag or filter element replacement operations.
MAINTENANCE (performed by user)
-
check the condition of suction hoses;
-
always keep the machine clean;
-
put on a dust-mask and clean the filter as follows:
a. open head (1) using hooks (12) (Fig. 5-6);
b. take out filter element (14) (Fig. 7-8) and clean it with a soft brush or wash with stream of water.
Make sure that it is thoroughly clean before re-using;
c. take out worn out dust bag (7) and close it with the plug (lid) (9) (Fig. 12);
d. insert a new dust bag and place it so that its hole coincides with the outlet (8), according to the
illustration (Fig. 11);
e. put back the filter element;
f. fasten the hooks of extractor head (1) and make sure that it is properly closed.
Warning:
-
If dust escapes from the machine, immediately switch it off.
-
In case of fire use the appropriate extinguishing media and leave your workplace.
-
In case of a power failure set all switches in the OFF position to prevent spontaneous
switching on of the unit when power comes back on (S135E).
Warning:
-
Use RUPES 001.1606/C dust bags only.
-
Always carefully check the dust bags. If dust gets inside the unit, it may cause serious
damage.
