7
POSSIBLE ABNORMALITIES AND HOW TO ELIMINATE THEM
EFFECTS
REASONS
REMEDY
It is not possible to start up the dust
extractor
Power failure
Power supply cable, switch or motor
have defects
Check if the plug is in the socket
Contact an authorised service centre
Dust extractor does not start
automatically (S135E)
Failure of electronic module or
microswitch
Contact an authorised service centre
Impaired dust extraction intensity/rate
Overfilled dust container (S135E)
Dusts escape from the outlet line
Check the filtering container
Check the flexible tube and
accessories
Escaping of dust from the outlet line
Damaged filter
Contact an authorised service centre
It is not possible to activate the tools
(S135E)
Automatic switching mechanism failure Contact an authorised service centre
DECLARATION OF CONFORMITY
CE mark awarded in 1996
We hereby declare assuming full responsibility that the presented dust/liquid extractor for industrial applications
conforms with directives concerning basic safety requirements:
73/23/CEE
- Low Voltage + 93/68/CEE
89/336/CEE
- Electromagnetic Compatibility + 91/263/CEE + 92/31/CEE + 93/68/CEE
The tests were performed according to European Regulations.
Low Voltage: EN 60335-1, EN 60335-2-2/A2;
Electromagnetic Compatibility: EN 55014-1, EN 61000-3-2;
Tests and limits concerning emitted noise: EN 23374.
