Runco Vistage series, Руководство по эксплуатации

Страница: 59 / 94

Operation
Vistage™ Series Flat-Panel Display Installation/Operation Manual 45
PRE
L
IMINAR
Y
• A s pect Ratio - Pa s te S etting s : To apply the Output Shift and Image Alignment
settings on the clipboard to a different aspect ratio and/or screen, do either of the
following:
• Switch to another aspect ratio (for example, from 16:9 to Cinema).
• Switch from Screen 1 to Screen 2 or vice versa.
Then, select Paste Settings from the Copy/Paste Aspect Ratio menu. The new settings
are saved automatically.
Output S hift: The controls in the Output Shift menu are similar to those in the Input
Position menu, except that they change the characteristics of the output signal. These
settings are saved independently
for each a s pect ratio .
Image Alignment: The Image Alignment menu provides precise, nine-point control over
the displayed image geometry. Use these controls as (and only if ) needed to re-position
the image corners, mid-points and center to eliminate “keystoning” (mis-aligned corners)
or “pincushion” distortion (mid-points not aligned with corners). See Figure 4-8.
Figure 4-8. Key s tone and Pincu s hion Di s tortion
Vertical Keystoning
Horizontal Keystoning
Pincushion Distortion