Runco Reflection RS-440 Скачать руководство пользователя

Страница: 26 / 84

Installation

Runco RS-440 Installation/Operation Manual

PRE

IMINAR

Notes on Remote Control

Operation

The remote control can be used to control the projector within the ranges shown in Figure
3-1.

Figure 3-1.

Available Range of the Remote Control

• For best results, hold the remote control within 23 feet (7m) of the back or top sensor

and aligned within 30°.

• Do not drop the remote control or expose it to moisture or high temperature.

• The remote control may malfunction under a fluorescent lamp. If that occurs, move the

projector away from the fluorescent lamp.

• Make sure that there is nothing obstructing the infrared beam between the remote

control and the IR receiver on the projector.

• If the effective range of the remote control decreases, or it stops working, replace the

batteries with new ones.

• Ambient conditions may possibly impede the operation of the remote control. If this

happens, point the remote control at the projector, and repeat the operation.

➤

The signal from the remote control can be reflected by the screen
or other surfaces.

Note

Содержание Reflection RS-440





















































































Результаты поиска

Содержание Reflection RS-440

Отзывы:

Похожие инструкции для Reflection RS-440

Бренды по названию

Популярные бренды

Runco Reflection RS-440, Руководство пользователя

Результаты поиска

Содержание Reflection RS-440

Отзывы:

Похожие инструкции для Reflection RS-440

Бренды по названию

Популярные бренды