Runco LIGHTSTYLE LS-10D, Руководство по установке и эксплуатации

Страница: 26 / 126

Controls and Functions
10 Runco LS-10d and LS-10HBd Installation/Operation Manual
PRE
L
IMINAR
Y
7. RIGHT BUTTON
Used to direct-select inputs or move the menu cursor right in the OSD. When no
menus are present on-screen, the
RIGHT button toggles through the different
sources, in this order:
Composite 1 - Composite 2 - Composite 3 - Component - HD 1 - HD 2 - SCART -
HDMI 1 - HDMI 2 - HDMI 3 - HDMI 4
8. MENU BUTTON
Press the MENU button to bring up the main menu, or to exit the current menu and
return to the previous one.
9. UP BUTTON
Use to direct-select aspect ratios or move the menu cursor up in the OSD. When no
menus are present on-screen, the
UP button toggles through aspect ratios in the
following order:
Native - Virtual Cinema - Cinema - VirtualWide - Letterbox - 4:3 - 16:9
10. ENTER BUTTON
When an item is highlighted on the OSD, the ENTER button selects the item.
11. S TANDBY LED
Lights amber when the DHD Controller is in standby mode; otherwise it is off.
2.4
DHD Controller Rear
Panel Figure 2-5 shows the rear connector panel on the DHD Controller.
Figure 2-5. DHD Controller Rear Panel
1. MAIN POWER S WITCH
Disconnects or applies power to the DHD Controller.
2. TRIGGER S
Connection for up to three (3), 12-volt trigger-controlled devices such as retractable
screens or screen masks. Output current is limited to 250 milliamperes (mA).
3. U S B
A standard, USB Series “B” connection to a personal computer, for performing
software upgrades and other service procedures.
USB
To Accessory Box
Video 1 Video 2
Video 3 Pr Pb PC / Control
RS-232
IR
Display Control
HDMI 1 HDMI 3
HDMI 2 HDMI 4 Ethernet
HDMI Out
To Display
HDMI Out
Audio Only
Component / SCART
Y
G Pb
B
Pr
R
Pr
R
Pb
B
Y
G
TRIGGERS
RS-232
1 2 3
H V
H V
Pr Pb
Componen p
Y
G Pb
B
Pr
R
Pr Pb Y
H V
H V
Y Pb Pr
R B G
H V
15 12 8 7
6 2 5 4 3
HDMI 2 HDMI 4 HDMI 2 HDMI 4
11 9 14 13 10
Video 1 Video 2
Video 3
nt / SCART en
1