Runco LightStyle LS-100d, Руководство по установке и эксплуатации

Страница: 64 / 114

Operation
48 Lightstyle™ Series LS-100d Installation/Operation Manual
PRE
L
IMINAR
Y
Information S ignal / S y s tem: Select Information from the Main Menu, then choose either Signal or
System to display information about the current input signal (resolution, frequency, type et
cetera) and installed firmware versions, as well as other information that uniquely identifies
your DHD Controller and display device.
Should you ever need to contact Runco Technical Support, this information will help them
answer your questions or resolve product performance issues.
Network: Select Information from the Main Menu, then choose Network to display
information about the Ethernet network connection.
To enable network communication via Ethernet, refer to IP Configuration on page 58.
Field S ervice / Manufacturing: The Field Service and Manufacturing menus are
password-protected and intended for use only by Runco service personnel and factory
technicians.
Information
Signal
System
Network
Field Service
Manufacturing
➤
S ignal
Input Source HDMI 1
Signal Format 1080p/60
Input Resolution 1920x1080
Vertical Freq 59.94 Hz
Horizontal Freq 67.500 kHz
Pixel Clock 148.500 MHz
Color Space REC709
Sync Type Separate
Memory Preset ISF Night
S y s tem
Model DHD4
Display Name LS-100d
Output Resolution 1920x1080
Serial Number 00000000
Boot Version 4.0
Firmware Version 4.0
Micro Version 4.0
Network
MAC Address 1A:2B:3C:4D:5E:6F
IP Address 192.168.0.150
Subnet Mask 255.255.0.0
Default Gateway 192.168.1.1
DHCP Enabled
Network Status Connected