Runco LightStyle LS-100d, Руководство по установке и эксплуатации

Страница: 22 / 114

Controls and Functions
6 Lightstyle™ Series LS-100d Installation/Operation Manual
PRE
L
IMINAR
Y
2.2
LS-100d Input Panel Figure 2-2 shows the LS-100d input panel.
Figure 2-2. L S -100d Input Panel
1. R S -232C INPUT (9-pin, male D- S ub; null-modem connection)
Connect the Di s play Control output on the DHD Controller to this input (see Figure
2-4).
2. MAIN POWER S WITCH
Disconnects or applies power to the projector.
3. POWER INPUT (100 to 240 VAC)
Connect the LS-100d to power here.
4. U S B
A standard, USB Series “B” connection to a personal computer, for performing
software upgrades and other service procedures.
5. VIDEO
Connect the HDMI Out (To Di s play) connector on the DHD Controller to this input.
6. POWER LED
Indicates projector status as follows:
• Solid green = AC power present, ready to turn on
• Flashing green (0.5 seconds on, 0.5 seconds off) = projector is warming up; keypad
functions not allowed
• Flashing green (1 second on, 1 second off) = projector is cooling down; keypad
functions not allowed
• Off = Projector functioning normally
VIDEO
POWER ERROR TEMP
RS-232 USB
6 7 8 3 1 2 4 5
POWER ERROR TEMP