Runco LightStyle LS-100d, Руководство по установке и эксплуатации

Страница: 25 / 114

Controls and Functions
Lightstyle™ Series LS-100d Installation/Operation Manual 9
PRE
L
IMINAR
Y
1. MAIN POWER S WITCH
Disconnects or applies power to the DHD Controller.
2. TRIGGER S
Connection for up to three (3), 12-volt trigger-controlled devices such as retractable
screens or screen masks. Output current is limited to 250 milliamperes (mA).
3. U S B
A standard, USB Series “B” connection to a personal computer, for performing
software upgrades and other service procedures.
4. R S -232 (To Acce ss ory Box)
A male, 9-pin D-sub connector for interfacing with external equipment. (For future
use.)
5. Di s play Control
Connect this to the RS-232 input on the LS-100d projector, using the supplied
communication cable and null-modem adapter (refer to
Connecting the DHD
Controller to the LS-100d on page 19).
6. IR
Wired input from a Niles- or Xantech-compatible, infrared (IR) repeater system. It is a
3.5-mm, mini phono jack, wired as follows:
Ring = No connection
Tip = IR Input
Sleeve = Ground
7. POWER INPUT (100 to 240 VAC)
Connect the DHD Controller to power here.
8. HD1 / HD2 (5 x Analog BNC s )
Two inputs (five BNCs per input) for connecting standard-definition (SD = 480i/576i),
enhanced-definition (ED = 480p/576p) or high-definition (HD = 720p/1080i/1080p)
component video sources, or RGBHV sources such as personal computers.
9. Component / S CART (3 x RCA connector s )
SD/HD input for connecting SDTV, EDTV or HDTV component video sources. Also
provides RGB input for SCART RGBS sources.
10. Video 1 / Video 2 / Video 3
Standard, composite video inputs for connecting a VCR, camcorder or other
composite video source. The Video 1 input also provides composite sync input for
SCART RGBS sources.
11. HDMI 1 / HDMI 2 / HDMI 3 / HDMI 4 (Digital)
HDCP-compliant digital video inputs for connecting an HDMI or DVI source.
12. Ethernet
A female RJ-45 connector for wired network communications.
13. HDMI Out (Audio Only)
Connect this output to an audio control system to pass through HDMI audio.
14. HDMI Out (To Di s play)
Connect this to the DHD Input on the LS-100d (see Figure 2-2).
15. R S -232 (PC / Control)
A female, 9-pin D-sub connector for interfacing with a PC or automation/control
system.