rulmeca RDR BL3, Техническое руководство

Страница: 5 / 40

TECHNICAL MANUAL FOR THE RDR BL3 - V1.1 DRIVE ROLLER Rev. 21/09/2018 page 5
1.5 Prescribed use
The BL3 series Drive Roller must be installed and used only in industrial environments for non
continuous service within environmental conditions and min. and max. temperatures indicated in the catalog (use
in internal environment, at temperature comprised between -10/+35 °C, without condensate).
The RDR BL3 product is designed to convey only material contained in boxes and/or cases, or which can in some
way be conveyed on rollers.
It is located on roller conveyors or conveyors for very light belts (in this case the approval of Rulmeca is required).
Any other use falls outside its prescribed scope unless duly discussed and approved in writing by Rulmeca and
such use is deemed to be non-conformant and voids the product warranty.
Using the RDR BL3 product still requires the equipment housing it to comply with current health and safety
regulations.
It is forbidden to make modifications to the delivered product unless they have been previously agreed with
Rulmeca.
1.6 Non prescribed use
The RDR BL3 Drive Roller must not be used:
➢
to convey people
➢
with stress from direct blows / in impact areas
➢
in environments at risk of explosion (Atex)
➢
in very wet conveyors and/or where washing takes place
➢
in general in applications requiring (IP) protection marking outside the levels specified in the catalog.
➢
if the customer applies a cladding (rubber, polyurethane or cover in other materials) that has not been
approved by Rulmeca after analysing actual operating conditions.
Rulli Rulmeca S.p.a. and its subsidiaries are not liable for noncompliant and improper use of the product and are
not liable for direct or indirect harm arising from such noncompliant use, which also voids the product warranty.
1.7 Qualified personnel
Qualified personnel are persons who are able to read and understand this user manual and perform tasks
competently, in compliance with national and local regulations.
Only qualified and trained persons are authorized to work with the RDR BL3 product who are able to use and
understand perfectly:
• manuals and technical drawings
• instructions on conformant use
• mechanical assembly and electrical wiring
• particular standards and provisions that apply to the system
• national and local health and safety regulations